Minolta Di251 - Feeding Originals of Different Sizes

3
Initial Steps . . .
3-12 Di251/Di351
Feeding Originals of Different Sizes
Feed originals of different sizes using a document feeder.
1
Load up to 50 originals into the
document feeder. The side that is to
be copied must be up.
2
Align the originals to the
back guide plate.
3
Ensure that the stack of originals
does not exceed the maximum fill
height (see Ä mark on the
document feeder)
4
Push the originals flush up against
thefeedchamber.
5
Set the document guide to the
largest original.
6
Touch the [MIXED ORIG
DETECTION] button.
7
Start the copy cycle.
The originals are fed in
automatically one after the other.
.
Many different sizes!
You can set mixed original detection as the default mode using the
User's Choice settings. For more information, see page 6-5.
.
The combination is the secret!
Just combine Mixed Original Detection with the “Auto Paper“ or
“Auto Size“ functions.
Duplexing Document Feeder
Automatic
Document Handler