7
Troubleshooting
7-26 Di251/Di351
Mailbin Finisher FN-504
CAUTION
Danger of burning on metal parts in the finisher!
Metal parts in the finisher can be hot.
Ü Do not touch metal parts in the finisher.
First remove the jammed paperfrom the paper transport section then from
the stapler section of the finisher.
Paper transport section
1
Reachintotherecessedgripatthe
top of the finisher. Pull the finisher
carefully from the copier.
2
Open the Transport Unit. Pull out
the jammed paper found there.
To Next Page
Loading...
