Minolta Di251 - Specifying the Paper Type for the Single Feed Tray

Customizing Your Copy
4
Di251/Di351 4-13
Specifying the Paper Type for the Single Feed Tray
Set the paper types that you wish to process with the single feed tray.
1
Place the copy paper on the single feed tray.
2
Press the [OHP/CARD] key.
The display will change.
3
Select the paper type.
m [NORMAL]
for plain paper
m [OHP]
for overhead projector films
m [CARD]
for card paper and labels
4
Confirm your selection with
[ENTER].
.
Not all modes are always available!
If you select the [OHP] or [CARD] paper type, not all copier functions
will be available. For more information, see page 7-44.