Minolta Di251 - Copying Originals with File Margins

4
Customizing Your Copy
4-48 Di251/Di351
Copying Originals with File Margins
(Not possible when using the automatic document feeder.)
If the originals you are copying have a margin, you should correct it before
applying the “1>2“ or “2>1“ function. To do so, specify the exact margin
settings of your originals. The copier then centres the copy automatically
onto the copy paper.
1
Load the originals.
2
Touch the index key [Orig.>Copy].
The Original>Copy settings are
shown.
3
Press [MARGIN].
The display will change.
4
Set the position of the file margin on
the originals.