Utility
6
Di251/Di351 6-41
Setting up Access Numbers
(Only possible when “100 Accounts“ is set up.)
Set up access numbers (administrator codes) for the copy counter.
1
Call up the “Copy Track Data“.
For more information, see page 6-37.
2
Touch the key of a count group.
The display will change.
3
Touch a key under “Access Code“.
4
Press the [C] key on the control
panel to delete a value that you no
longer need.
5
Enter a 4-digit administrator code
(access code) on the keypad.
?
Did you enter an incorrect
number?
Ü Press [C] on the control panel.
Enter the administrator code
again.
6
If necessary, make additional
settings for other counters.
To Next Page
Loading...
