Minolta Di251 - Storing Custom Paper Sizes for the 1 St Drawer

4
Customizing Your Copy
4-8 Di251/Di351
Storing Custom Paper Sizes for the 1st Drawer
You can store up to two custom paper sizes that you use frequently for the
1st drawer.
1
Touch the Basics menu key [Paper].
The paper settings are shown.
2
Press the key for the 1st drawer.
3
Press the [MODE CHANGE] key.
The display will change.
Note the following important information!
Not all dimensions are possible.
• If 432 mm is specified for [X], a maximum of 279 mm can be specified for [Y].
• If 297mm is specified for [Y], a maximum of 420mm can be [X].