Minolta Di251 - Page 153

Customizing Your Copy
4
Di251/Di351 4-51
5
Specify the copy type under “Copy“.
The display will change.
6
Press [BOOK ERASE].
The display will change.
7
Specify the erase area for the book.
m Frame Erase:
variable from 5 to 20mm
m Centre Erase:
fixed at 12mm
?
Cantheeraseareaforthe
centre be modified?
This value can be changed by a
technical representative.
Ü Contact your technical
representative if needed.
8
Set the width of the erase area.
Confirm your selection with
[ENTER].
The display will change.