Utility
6
Di251/Di351 6-19
6
Select a memory position from [1] to
[10] to save the job program.
?
Why is there a symbol at some
memory locations?
The free symbol indicates that
the memory location is free.
Ü Save a copy job program to a
free memory location.
7
Confirm your selection with [EXIT].
The display will change.
.
Overwritten and deleted!
If all three memory locations are occupied, a copy job program can be
stored only by overwriting a memory location. The copy job program
on the overwritten memory location is deleted by this action.
To Next Page
Loading...
