7
Troubleshooting
7-36 Di251/Di351
Finisher FN-110
The FN-110 finisher has one staple unit.
1
Reachintotherecessedgripatthe
top of the finisher. Pull the finisher
carefully from the copier.
2
Rotate the green dial on the right
side of the finisher to the left. This
moves the staple unit to the middle.
3
Pull the staple unitcarefullyfromthe
holder.
4
Lift the staple guide. Pull a set of
staples out.
To Next Page
Loading...
