Getting to Know Your Copier
2
Di251/Di351 2-51
4
Shake the new toner bottle a few
times.
5
Carefully remove the seal from the
toner bottle.
6
Position the new toner bottle in the
toner bottle holder. Be sure the side
labelled "UP" on the toner bottle is
pointed upwards when doing so.
7
Close the cover of the toner bottle.
The copier will begin to refill the
toner supply. Do not switch it off
during this period. Do not open any
doors on the copier.
.
Copies still too light?
If copies are still too light immediately after replacing the toner bottle,
you can activate the toner replenisher function. For more information,
see page 6-28.
To Next Page
Loading...
