Getting to Know Your Copier
2
Di251/Di351 2-57
5
Press the correspondingly marked
position on the stapler unit.
This releases the upper part of the
stapler unit. You can now remove
the empty staple magazine.
6
Position a new staple cartridge.
Carefully remove the seal from the
staples.
7
Position the staple unit back in the
holder.
The staple unit should click into the
holder.
8
Close the right cover (FN7) of the
finisher.
9
Slide the finisher carefully back to
the copier.
To Next Page
Loading...
