112
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out
terminal which can be used to connect the camera to a television using the supplied
video cable. The camera is compatible with the NTSC and PAL standards. The video-
output setting can be checked and set in the Custom 2 section of the setup menu (p.
114).
Turn off the television and the camera.
Insert the mini-plug end of the video cable into the
camera’s video-out terminal.
Plug the other end of the video cable into the
video-input terminal on the television.
Turn the television on.
Turn the camera’s mode dial to the playback position.
• The camera’s monitors will not activate when the camera is attached to a television. The
playback-mode display will be visible on the television screen.
Change the television to the video channel.
View images as described in the playback section.
1
1.
2.
3.
4.
5.
6.
7.
To Next Page
Loading...
Need help?
General
