24
CHANGING BATTERIES
BASIC OPERATION
Open the battery-chamber door by moving the battery-
chamber lock to the open position .
Insert the batteries.
• Make sure the positive and negative battery terminals are
orientated as illustrated on the
diagram in the battery chamber.
This digital camera uses four AA-size batteries. Ni-MH batteries can be used, and are
recommended as they will offer longer life. When using Ni-MH batteries, fully recharge
them with a battery charger suitable for Nickel Metal Hydride cells. Please consult your
vendor about an appropriate charger.
When replacing batteries, check that the mode dial is in the
off position.
Close the battery-chamber door and slide the lock lever to
the close position .
To Next Page
Loading...
