White Balance is the camera’s ability to make different types of
lighting appear neutral. The effect is similar to selecting daylight or
tungsten film, or using colour compensating filters in conventional
photography.
When setting the white
balance, “Auto” (data panel) and “AWB”
(monitors) will be displayed to indicate the
auto white-balance setting. An icon will be
displayed on the data panel and monitors if a
setting other than auto white-balance was
chosen. See setting the function dial section
on page 40.
For using the Custom white-balance setting.
58
RECORDING MODE
WHITE BALANCE
No
display
Fluorescent
Tungsten
Daylight
AUTO
Cloudy
Custom setting
For fluorescent lighting: office ceiling lights.
For incandescent lighting: household filament
light bulbs.
For outdoor and sunlit subjects.
The AUTO setting will detect the type of light
and adjust the white balance accordingly.
For overcast outdoor scenes.
For manual white-balance calibration.Custom calibration
To Next Page
Loading...
Need help?
General
