89
Controller
QV/delete button
INSTANT PLAYBACK
After an image is captured, it will be displayed on the monitors before being saved.
When in continuous drive or bracketing mode, an index display is used. The instant
playback function is set in the Custom 2 section of the recording-mode menu (p. 80).
No
2 sec
10 sec
Recording-mode
menu setting
Instant playback is disabled.
The captured image will be displayed for two or ten seconds. While dis-
played, the image can be deleted before being saved.
• If the centre of the controller is pressed during the instant playback, the displayed image will
immediately be saved and the playback cancelled.
1
2
3
To delete an image during the
instant playback, press the
QV/delete button.
• A confirmation screen will appear.
Press the controller to
delete the image.
• The live image will be
displayed on the monitor.
Use the left/right keys of the
controller to highlight “YES.”
• “NO” will cancel the operation.
: delete : store
Rec.
To Next Page
Loading...
Need help?
General
