127
Choose the recommended search for a
suitable driver. Click “Next.”
Choose to specify the location of the dri-
ver. The browse window can be used to
indicate the location of the driver. When
the driver location is shown in the win-
dow, click “Next.”
• The driver should be located in the CD-
ROM drive at :\Win98\USB.
MANUAL INSTALLATION
To install the Windows 98 driver manually, follow the instruction in the connecting-the-
camera-to-a-computer section on page 124.
When the camera is plugged into the com-
puter, the operating system will detect the
new device and the add-new-hardware-wiz-
ard window will open. Place the DiMAGE
software CD-ROM in the CD-ROM drive.
Click “Next.”
(Continued on the next page)
To Next Page
Loading...
