85
MEMORY - SAVING CAMERA SETTINGS
Three sets of camera settings can be saved. This feature saves time under frequently
repeating conditions by eliminating the need to set camera functions. Except for the
AF/AEL button, subject programs, data imprinting, and instant playback settings, all
recording-mode camera settings will be saved including the position of the Flex Focus
Point, the Custom white balance setting and changes made with the function dial and
digital effects control. Although the the bracketing drive mode setting can be saved, the
type of bracket, exposure, contrast, or colour saturation, must be set again with the
digital effects controller.
Camera settings are saved with the memory function in the Custom 1 section of the
recording-mode menu (p. 80). Initially, each memory location contains the camera’s
original settings.
To save the current camera settings, select the store-
memory setting from the memory option in the Custom
1 section of the recording-mode menu. The store-in-
memory screen will appear.
On the store-in-memory screen, chose the memory
register in which the camera settings are to be saved.
Pressing the controller will complete the operation; the
previous settings will be erased and replaced by the
new ones.
To recall a setting, simply choose and enter the appropriate memory register from the
memory option of the Custom 1 section of the recording-mode menu. The settings are
instantly applied to the camera.
Camera settings cannot be deleted from memory by turning the camera off, using the
pro-auto button (p. 37), or choosing the default function on the setup menu (p. 120).
Rec.
Basic
Custom1 Custom2
Exp. bracket
Interval
T/F/C
AF/AEL button
1
2
3
Store memory
Mag. button
Memory
To Next Page
Loading...
Need help?
General
