117
AUTO POWER SAVE
The camera will turn off the EVF and data panel to conserve battery power if no opera-
tion is made within a certain period. The length of this period can be changed to 1, 3, 5,
or 10 minutes. The auto-power-save option will not effect the display period of LCD
monitor; it will shut down after 30 seconds. To restore the displays when they shut
down, simply press the shutter-release button or the display information button.
When the camera is connected to the computer, the auto-power-save period is set to
ten minutes. This period cannot be changed.
BEEP
The audio signal can be turned off or on. The tone of the signal can be changed to high
or low.
LANGUAGE
The language used in the menus can be changed.
To Next Page
Loading...
Need help?
General
