Imagestore 750 User Manual Web Page
Miranda Technologies Inc. Page 265
To perform a full software re-initialisation:
• Click on the “Browse” button in the “Full Re-initialisation” section,
and then select the required CPIO file
• Click on the “Full Re-initalisation” button after confirming with the
“Are you sure?” checkbox
• You may monitor the update progress on the front panel which will
run through several parts ending with the message “DONE!”
• After the software has installed, the Imagestore will automatically
power cycle and boot the new software.
• When Imagestore restarts the new software will be running.
To Next Page
Loading...