Product and safety information, legal information
Mitel 6873 SIP 125
eud-1744/1.4 – R5.0 HF2 – 10.2017
There are no user serviceable parts within this equipment. Refer all servic-
ing to a MITEL authorized repair facility or to MITEL Incorporated. If you
require a MITEL return authorization number, or information on obtaining
service or repairs, please contact MITEL at the following telephone num-
ber:
A MITEL return authorization number must be obtained before sending
equipment to the MITEL repair facility.
If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem
is resolved.
For information concerning repairs that can be made by the customer, see
Troubleshooting Information. The documentation is shipped with the sys-
tem software.
This equipment may not be used on public coin phone service provided by
the telephone company. Connections to party lines service are subject to
state tariffs. (Contact the state public utility commission, public service
commission or corporation commission for information).
When Programming Emergency Numbers and (or) Making Test Calls to
Emergency Numbers
• Remain on the line and briefly explain to the dispatcher the reason for
the call
• Perform such activities in the off-peak hours, such as early mornings or
late evenings.
Proper Answer Supervision is when
• This equipment returns answer supervision signals to the PSTN when
DID calls are
– answered by the called station
– answered by the attendant
1-800-SXMITEL (1-800-796-4835)
Repair facility Mitel Networks
2160 West Broadway, Suite #103
Mesa, AZ
U.S.A. 85202
ALLOWING THIS EQUIPMENT TO BE OPERATED IN SUCH A MANNER AS
TO NOT PROVIDE FOR PROPER ANSWER SUPERVISION IS A VIOLA-
TION OF PART 68 OF THE FCC’s RULES
To Next Page
Loading...
Need help?
General
