Mitsubishi Electric MELSEC iQ-R-R00CPU - Page 64

62
1 RUNNING A PROGRAM
1.5 Program Execution Type
Trigger setting
Use the event execution type detail setting.
[CPU Parameter]  [Program Setting]
Operating procedure
Displayed items
*1 It cannot be set in the R00CPU, R01CPU, and R02CPU.
"Program Setting" window
1. Click "Detailed Setting" on the
"Program Setting" window.
"Detailed Setting" window
2. Select the program name and set
the execution type to "Event".
3. Click "Detailed Setting Information".
"Event Execution Type Detailed Setting" window
4. Sets the trigger type to execute the
event execution type program.
Item Description Setting range Default
Interruption occurrence Sets the interrupt pointer used as the trigger. I0 to I15, I28 to I31, I44, I45, I48
*1
, I49
*1
, I50 to I1023 
ON of Bit Data (TRUE) Sets the device used as the trigger. Page 60 Bit data ON (TRUE) 
Clear Output and Current Value of
Timer
Sets that the current values of the output (Y),
timer (T), and long timer (LT) used in this
program are cleared at the execution turn of the
event execution type program that comes after
the specified bit data is OFF.
• Do Not Clear
• Clear
Do Not Clear
Passing Time Unit Sets the time passed. • When "ms" is selected: 1 to 65535ms (in units of
1ms)
• When "s" is selected: 1 to 65535s (in units of 1s)
ms
Clear Output
and Current
Valu e of Timer
Sets that the current values of the output (Y),
timer (T), and long timer (LT) used in this
program are cleared at the execution turn of the
event execution type program that comes after
the specified time passes.
• Do Not Clear
• Clear
Do Not Clear