768
APPX
Appendix 1 Error Codes
412AH File related error • The request cannot be executed since the specified drive
(memory) is ROM.
• Execute again after changing the target drive (memory).
412BH File related error • The specified drive (memory) is write-inhibited. • Execute again after changing the write inhibit condition or
drive (memory).
412CH File related error • The specified drive (memory) is write-inhibited. • Execute again after changing the write inhibit condition or
drive (memory).
412DH File related error • The specified drive (memory) does not have enough free
space.
• Execute again after increasing the free space of the drive
(memory).
412EH File related error • The specified drive (memory) does not have enough free
space.
• Execute again after increasing the free space of the drive
(memory).
412FH File related error • The drive (memory) capacity differs between the drive
(memory) copy destination and copy source.
• Execute again after checking the drive (memory) copy
destination and copy source.
4130H File related error • The drive (memory) type differs between the drive (memory)
copy destination and copy source.
• Execute again after checking the drive (memory) copy
destination and copy source.
4131H File related error • The file name of the file copy destination is the same as that
of the copy source.
• Execute again after checking the file names.
4132H File related error • The specified number of files does not exist. • Execute again after checking the specified data.
4133H File related error • The specified drive (memory) has no free space. • Execute again after increasing the free space of the drive
(memory).
4134H File related error • The attribute specification data of the file is wrong. • Execute again after checking the specified data.
4135H File related error • The date/time data of the engineering tool (personal
computer) is out of range.
• Execute again after checking the clock setting of the
engineering tool (personal computer).
4136H File related error • The specified file already exists. • Execute again after checking the specified file name.
4137H File related error • The specified file is read-only. • Execute again after changing the condition of the specified
file.
4138H File related error • Simultaneously accessible files exceeded the maximum. • Execute again after decreasing file operations.
4139H File related error • The size of the specified file has exceeded that of the
existing file.
• Execute again after checking the size of the specified file.
413AH File related error • The specified file has exceeded the already existing file size. • Execute again after checking the size of the specified file.
413BH File related error • The same file was simultaneously accessed from different
engineering tools.
■When CPU Module Logging Configuration Tool is used
• An operation was performed to a file being accessed.
• Execute again after a while.
413CH File related error • The specified file is write-inhibited. • Execute again after changing the file condition.
413DH File related error • The specified file capacity cannot be secured. • Execute again after increasing the capacity of the specified
drive (memory).
413EH File related error • Operation is disabled for the specified drive (memory). • Execute again after changing the target drive (memory).
413FH File related error • The file is inhibited to be written to the file storage area. • Execute again after changing the specified drive (memory).
414AH Intelligent
function module
specification
error
• In a multiple CPU system, operation was performed to a
non-controlled intelligent function module or network
module.
• Execute the operation again from the control CPU of the
target module.
414CH Intelligent
function module
specification
error
• The specified buffer memory address cannot be accessed. • Execute again after checking the buffer address.
4150H File related error • An attempt was made to initialize the drive (memory)
protected by the system.
• Do not initialize the target drive (memory) as it cannot be
initialized.
4151H File related error • An attempt was made to delete the file/folder protected by
the system.
• Do not delete the target file as it cannot be deleted.
4160H Online
registration error
• The registered number of I/O devices of the forced on/off
target exceeded the maximum.
• Cancel the registration of I/O devices of the forced on/off
target that is not used.
4168H Online
registration error
• The number of registered settings of the device test with
execution conditions has exceeded 32.
• Disable the settings of the device test with execution
conditions registered in the CPU module. Alternatively,
reduce the number of executional conditioned device tests
to be registered at a time.
4169H Online
registration error
• No settings of the device test with execution conditions are
registered.
• Check the number of registered settings of the device test
with execution conditions in the CPU module, and disable
the settings.
Error
code
Error name Error details and cause Action
To Next Page
Loading...
