Mitsubishi Electric MELSEC iQ-R-R00CPU - Page 798

796
APPX
Appendix 2 Event List
24000 Operation Info Clock setting The clock data was set. Operation
source
information
Clock
information
(before change)
Clock
information
(after change)
24001 Remote operation
request accepted
A remote request (RUN, STOP, or
PAUSE) was accepted.
Remote
operation type
information

24100 Operating status
change (RUN)
The operating status of the CPU module
was changed to RUN.

24101 Operating status
change (STOP)
The operating status of the CPU module
was changed to STOP.
24102 Operating status
change (PAUSE)
The operating status of the CPU module
was changed to PAUSE.
24200 Creation of new
folders, writes to
files/folders
*1
• A new folder was created.
• A new file was created or data was
written to a file.
Operation
source
information
Drive/file
information
24201 File copy
*1
A file was copied. Copy source
drive/file
information
Copy
destination
drive/file
information
24202 Folder/file rename
*1
A folder name or file name was changed.
24300 Safety operation
mode change
(SAFETY MODE
(wait-for-restart))
The safety operation mode was changed
to SAFETY MODE (wait-for-restart).

Module
communication test
A module communication test was
executed.
24301 Safety operation
mode change
(TEST MODE)
The safety operation mode was changed
to TEST MODE.
25000 Online module
change
The online module change processing
completed.
System
configuration
information
Event
code
Event
type
Event
category
Detected event Description Detailed information
Detailed
information 1
Detailed
information 2
Detailed
information 3