APPX
Appendix 13 How to Use CPU Module Logging Configuration Tool
963
A
■Reading the logging setting from SD memory card
The following procedure is to read the data logging setting written in an SD memory card attached to the personal computer.
1. Attach an SD memory card to the personal computer.
2. Open the following window.
[Project] [Read Logging Setting from Memory Card (SD)]
3. Select the drive from which data is read and data to be read.
4. Click the [Read] button.
• Any existing data (data logging setting with the same setting number or common setting) on the target is
overwritten.
• The PLC series of the setting data in the SD memory card must be "RCPU".
Item Description
Drive to read from Select the drive where the data to be read is stored.
Target logging setting data Select the data item to be read.
To Next Page
Loading...
