964
APPX
Appendix 13 How to Use CPU Module Logging Configuration Tool
■Writing the logging setting to SD memory card
The following procedure is to write the settings being edited in a format with which the CPU module can operate. Once writing
the settings directly into an SD memory card attached to the personal computer and attaching the card to the CPU module,
the data logging starts. ( Page 204 Auto Logging)
1. Attach an SD memory card to the personal computer.
2. Open the following window.
[Project] [Write Logging Setting into Memory Card (SD)]
3. Select the drive to which data is written and data to be written.
4. Click the [Write] button.
Any existing data (data logging setting with the same setting number or common setting) on the target is
overwritten.
Item Description
Drive to write into Select the drive where the data to be written is stored.
Target logging setting data Select the data to be written.
To Next Page
Loading...
