966
APPX
Appendix 13 How to Use CPU Module Logging Configuration Tool
Setting data logging
This menu item launches a wizard that helps users to configure the required settings for using the data logging function.
Edit item tree [RCPU] [Data Logging Setting] [Edit] button
■Logging type
The following window is used to set the data logging type, file format, storage destination of the data logging file, and target
data (device or label) of data logging. ( Page 178 Logging Type, Page 950 Data output type, Page 183 Storage
location of data logging files, Page 171 Data to Be Collected)
Item Description Setting range Default
Logging type Select the logging type. • Continuous logging
• Trigger logging
Continuous logging
Logging target Device Select this item when using a device as the target
data specified in the "Sampling", "Data", and
"Trigger" settings.
Checked
Label Select this item when using a label as the target data
specified in the "Sampling", "Data", and "Trigger"
settings.
Not checked
Target program Input a target program name when specifying a local
label in a program block.
File format Select the output file format. ( Page 183 Storage
format of data logging files)
• Unicode text file
• Binary file
Unicode text file
Data storage destination memory Select the storage destination of the data logging
files.
• SD memory card
• CPU built-in memory (function
memory)
SD memory card
To Next Page
Loading...
