Mitsubishi Electric MELSEC iQ-R-R00CPU - Page 969

APPX
Appendix 13 How to Use CPU Module Logging Configuration Tool
967
A
■Sampling
The following window configures the collection interval and/or collection start conditions ( Page 173 Data Collection
Conditions)
Window
Displayed items
Item Description Setting range Default
Each scanning cycle Select this item to collect data on every scan. 
Time
specification
Collection time value Specify the collection interval value. • ms: 1 to 32767
• s: 1 to 86400
1ms
Sample data at the next
END processing after
the specified time has
elapsed
Select this checkbox to collect data at a timing
when the first END processing is done after the
specified time interval is elapsed.
 Checked
Interrupt
occurrence
Interrupt pointer Select the interrupt cycle. • I28: Interrupt by internal timer
• I29: Interrupt by internal timer
• I30: Interrupt by internal timer
• I31: Interrupt by internal timer
• I44: Inter-module synchronous
interrupt
• I45: Multiple CPU synchronous
interrupt
• I48: High speed internal timer
interruption 2
• I49: High speed internal timer
interruption 1
I28: Interrupt by
internal timer
Multiple Specify a multiple applied to the interval value. 1 to 50 1