Mitsubishi Electric MELSEC iQ-R-R00CPU - Page 982

980
APPX
Appendix 13 How to Use CPU Module Logging Configuration Tool
Displayed items
*1 A space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
Item Description Setting range Default
Transferring files to the FTP server Select this item to transfer files to the FTP server. Checked/Not
checked
Not checked
[Server Setting]
button
FTP Server Name Specify the FTP server with an IP address or server name.
To specify the FTP server with an IP address, input a value in the
decimal format.
To specify the FTP server with a server name, select the server
name. The DNS setting of the engineering tool is required for
specifying with the server name.
[Module Parameter]  [Application Settings]  [DNS
Settings]
• IP address
0.0.0.1 to
223.255.255.254
• Server Name
1 to 256 single-
byte characters
(alphanumeric
characters and
special
characters
*1
)
without " * , + / : ;
< = > ? \ |
IP address (blank)
Port No. Set the FTP server control port number. 1 to 65535 21
Login User Name Set the FTP server account (user name). 1 to 32 ASCII
characters
(alphanumeric
characters and
special characters
*1
)
without " , : ;
Blank
Login Password Set the FTP server login password. 0 to 32 characters
(alphanumeric
characters and
special characters
*1
)
Blank
Confirm Login
Password
Directory Path Set the directory path of the file transfer destination. If the
specified directory path does not exist, an error occurs at file
transfer. When transferring data logging files to the same FTP
server from multiple CPU modules, specify different directory
paths for the file transfer destinations. If the same directory path is
specified, files may be overwritten with each other.
1 to 64 single-byte
characters
(alphanumeric
characters and
special characters
*1
)
without a space and
" * , . : ; < > ? |
/
Data Transfer Mode Specify the FTP data transfer mode. Generally, specify the PORT
mode. If communications between the CPU module and the FTP
server allow only the PASV mode due to Windows firewall, specify
the PASV mode.
•PORT Mode
(Normal)
• PASV Mode
PORT Mode
(Normal)
[File Transfer Test]
button
Execute the file transfer test. ( Page 198 File transfer test) 
Transfer Destination Server Setting List Settings for each setting number configured on the "FTP Setting"
window are displayed. The contents of the settings that should not
be duplicated with other settings such as directory path can be
checked.

FTP server connection request timeout
time
Set the waiting time from when the connection request from the
CPU module to the FTP server is sent to when the response is
received.
1 to 30 seconds 10 seconds
File transfer retry time Set the time to retry the file transfer when the file transfer fails due
to an error caused by communication failure such as the network
error between the CPU module and the FTP server.
1 to 1440 minutes One minute
Adjust directory configuration of FTP
server by CPU
When the data logging files are transferred, a directory is
automatically created in the directory path specified by the FTP
server so that the structure is the same as the storage destination.
Checked/Not
checked
Checked
Delete files completed transfer At the completion of data logging file transfer, transferred files are
automatically deleted. ( Page 200 Deleting files completed
transfer)
When "CPU built-in memory (function memory)" is specified for
the storage destination of the data logging files, the setting is
always checked.
Checked/Not
checked
Not checked