Mitsubishi Electric MELSEC iQ-R - Bacnet Monitoring Function; How to Use the Bacnet Monitoring Function

140
1 FUNCTIONS
1.6 BACnet Monitoring Function
1.6 BACnet Monitoring Function
This function monitors (reads with the set cycle) the property values from a BACnet module or another BACnet device.
A BACnet module reads the value of a property in accordance with the value of the CONTROL of an access block for BACnet
monitoring with the set cycle when assigning the access block for BACnet monitoring.
The properties of the data types described in the following section can be monitored.
Page 289 PrimitiveDataType
By creating a program using read data, the control linked with monitoring can be performed.
How to use the BACnet monitoring function
Operating procedure
1. Select [Maintenance]  [Pause/Restart], and click the [Pause] button on the "Pause/Restart" screen.
2. Select [Settings]  [BACnetMonitor], and click the [Add] button.