Mitsubishi Electric MELSEC iQ-R - Bacnetmonitor

192
1 FUNCTIONS
1.12 Configuration Function
BACnetMonitor
The property value of a monitoring target set with the BACnet monitoring function is displayed.
For the settings for the BACnet monitoring function, refer to the operating procedure from 1 to 6 described in the following
section.
Page 140 How to use the BACnet monitoring function
Operating procedure
1. Select [BACnetMonitor], and click the [Detail] button of "DeviceInstanceNo" to check the monitored value.
2. Check the monitored value.
If an error occurred, check the row of "Status" and take corrective actions.