Mitsubishi Electric MELSEC iQ-R - Bacnetdevice

1 FUNCTIONS
1.12 Configuration Function
195
1
BACnetDevice
To perform BACnet communication with another BACnet device, the device should be recognized by the BACnet module as a
communication target (recognized device).
Adding recognized devices
A recognized device can be added either automatically or by manually.
It is added to the DeviceAddressBinding property of a Device object.
■ How to add the devices automatically
A BACnet module recognizes another BACnet device which sent an I-Am service as a target device.
■ How to add the devices manually
Operating procedure
1. Select [BACnetDevice].
2. Click the [Add] button, and set the following items.
3. Click the [Edit] button.
4. On the "BACnetDevice" screen, the recognized BACnet devices are displayed.
Item Description
DeviceInstanceNo Specify the instance number of a device.
NetworkNo Specify a network number.
IP Address Set the IP address of a BACnet module.
PortNo Set a port number for BACnet communication.
I-Am monitoring Select whether to perform device existence monitoring by an I-Am or not.