102
1 FUNCTIONS
1.1 BACnet Object Function
NotificationClass (NC) object
This object is used for setting a send destination of Event notifications.
For the setting of the Event notification send setting, refer to the following section.
Page 180 Event notification send setting
List of properties
The following shows the properties supported by NotificationClass objects.
Additionally, the availability of reading/writing data from/to a BACnet device is shown in the following table.
R: Read-only, W: Write-only, R/W: Read/Write
PropertyID Property Data type R/W Remarks
1 AckRequired BitString R
17 NotificationClass Unsigned R
28 Description CharacterString R/W
75 ObjectIdentifier BACnetObjectIdentifier R
77 ObjectName CharacterString R/W
79 ObjectType Enumerated R
86 Priority BACnetARRAY[3]ofUnsigned R/W
102 RecipientList ListofBACnetDestination R/W
168 ProfileName CharacterString R/W
To Next Page
Loading...
