1 FUNCTIONS
1.1 BACnet Object Function
35
1
AnalogValue (AV) object
This object can be used as for the same purpose as an AnalogInput object or AnalogOutput object.
Set whether to use this object as an AnalogInput object or AnalogOutput object by setting a ValueIsOutput property.
(Page 38 Settings when using an AnalogValue object)
List of properties
The following shows the properties supported by AnalogValue objects.
Additionally, the availability of reading/writing data from/to a BACnet device is shown in the following table.
R: Read-only, W: Write-only, R/W: Read/Write
PropertyID Property Data type R/W Remarks
0 AckedTransitions BitString R
17 NotificationClass Unsigned R/W
22 CovIncrement REAL R/W
25 Deadband REAL R/W
28 Description CharacterString R/W
35 EventEnable BitString R/W
36 EventState Enumerated R
45 HighLimit REAL R/W
52 LimitEnable BitString R/W
59 LowLimit REAL R/W
72 NotifyType Enumerated R/W
75 ObjectIdentifier BACnetObjectIdentifier R
77 ObjectName CharacterString R/W
79 ObjectType Enumerated R
81 OutOfService BOOLEAN R/W
85 PresentValue REAL R/W
87 PriorityArray BACnetPriorityArray R
103 Reliability Enumerated R
104 RelinquishDefault REAL R/W
111 StatusFlags BitString R
113 TimeDelay Unsigned R/W
117 Units Enumerated R/W
130 EventTimeStamps BACnetARRAY[3]ofBACnetTimeStam
p
R
168 ProfileName CharacterString R/W
9001 PowerFactor BOOLEAN R/W BACnet module proprietary properties
Page 270 Details of BACnet Module
Proprietary Properties
9002 IntrinsicEventDisable BOOLEAN R/W
9003 UnsolicitedCOV Enumerated R/W
9004 ValueIsOutput BOOLEAN R/W
9006 COVSendInterval Unsigned R/W
To Next Page
Loading...
