1 FUNCTIONS
1.1 BACnet Object Function
63
1
MultiStateOutput (MO) object
This object is used for applying 16-bit data written by BACnet device to a programmable controller system.
List of properties
The following shows the properties supported by MultiStateOutput objects.
Additionally, the availability of reading/writing data from/to a BACnet device is shown in the following table.
R: Read-only, W: Write-only, R/W: Read/Write
PropertyID Property Data type R/W Remarks
0 AckedTransitions BitString R
17 NotificationClass Unsigned R/W
28 Description CharacterString R/W
31 DeviceType CharacterString R/W
35 EventEnable BitString R/W
36 EventState Enumerated R
40 FeedbackValue Unsigned R
72 NotifyType Enumerated R/W
74 NumberOfStates Unsigned R/W
75 ObjectIdentifier BACnetObjectIdentifier R
77 ObjectName CharacterString R/W
79 ObjectType Enumerated R
81 OutOfService BOOLEAN R/W
85 PresentValue Unsigned R/W
87 PriorityArray BACnetPriorityArray R
103 Reliability Enumerated R
104 RelinquishDefault Unsigned R/W
110 StateText BACnetARRAY[N]ofCharacterString R/W
111 StatusFlags BitString R
113 TimeDelay Unsigned R/W
130 EventTimeStamps BACnetARRAY[3]ofBACnetTimeStam
p
R
168 ProfileName CharacterString R/W
9002 IntrinsicEventDisable BOOLEAN R/W BACnet module proprietary properties
Page 270 Details of BACnet Module
Proprietary Properties
9003 UnsolicitedCOV Enumerated R/W
9006 COVSendInterval Unsigned R/W
To Next Page
Loading...
