Mitsubishi Electric MELSEC iQ-R - Execution Example of the Read Function

128
1 FUNCTIONS
1.4 BACnet Request Function (Read Function)
Execution example of the read function
The following shows an execution example of the read function which reads the PresentValue property value of an
AnalogInput object (instance number: 0) in a BACnet device (instance number of a device: 3) from a BACnet module.
Assignment of an access block for reading
Assign the following access block for reading in [Settings]  [BACnetRequest]  [Read].
For the assignment method, refer to the operating procedure from 1 to 4 described in the following section.
Page 124 How to use the read function
Item Description
BufferMemoryAddress 300
Qty. 1