Mitsubishi Electric MELSEC iQ-R - Page 150

148
1 FUNCTIONS
1.7 COV Interaction Function
5. Check the buffer memory address.
Create a program to read COV notification data by referring to the format of access blocks for COV interaction. Replace the
offset +0 in the format of access blocks for COV interaction with the buffer memory address displayed with a configuration
function. (Page 294 Format of access blocks for COV interaction)
6. When the CONTROL of an access block for COV interaction is '1', read COV notification data from the access block for
COV interaction using a program.
For the operation of a BACnet module, refer to the following section.
Page 149 Operation of a BACnet module
7. Select [COV Interaction], and click the [Detail] button of a send source DeviceInstanceNo of the COV notification to be
checked.
8. Check the COV notifications.