Mitsubishi Electric MELSEC iQ-R - Page 178

176
1 FUNCTIONS
1.12 Configuration Function
Additional information setting for CSV file
With the following setting, the objects related to an object and a memo can be added to a CSV file.
For the method to save object data to a CSV file, refer to the following section.
Page 203 Saving data to a CSV file
For the format of CSV files, refer to the following section.
Page 273 CSV File Format
Operating procedure
1. Select [BACnetObject] to open the "BACnet Objects" screen.
2. Click the [Browse] button of an ObjectType to set additional information for a CSV file.
3. Click the [Set] button of an object in "CSV Information" to set additional information for a CSV file.
4. Set the cell of "Referenced ObjectID1", "Referenced ObjectID2", and "Note", then click the [Update] button.