1 FUNCTIONS
1.12 Configuration Function
207
1
BACnet request (read)
For the assignment method of a data block (access block for reading) with a web browser, refer to the operating procedure
from 1 to 3 described in the following section.
Page 124 How to use the read function
For details on the format of access blocks for reading, refer to the following section.
Page 291 Format of access blocks for reading
■ Assigning data blocks using a CSV file
By using a CSV file, multiple data blocks
*1
can be assigned in a batch.
For the format of CSV files, refer to the following section.
Page 276 CSV file for the BACnet request function
*1 When '0' is specified to the buffer memory address, the data blocks are automatically assigned to the free space in the buffer memory.
1. Select [Settings] [BACnetRequest].
2. Click the [Browse] button and select a CSV file.
3. Click the [Add]
*1
button or the [Overwrite]
*2
button in the row of "Add/Overwrite from CSV file".
*1 Click this button when assigning only unassigned data to a BACnet module among the data in a CSV file.
*2 Click this button when deleting data in a BACnet module and overwrite the data with the data in a CSV file.
To Next Page
Loading...
