1 FUNCTIONS
1.1 BACnet Object Function
79
1
■ Pulse input
The usage of a pulse input area differs depending on the value set to "PulseDirectInput" in [Settings] [Basic Information]
[BACnet Detail Setting] button "Interface". (Page 281 Interface)
• When the value is '0': The offset +3 is not used.
• When the value is '1'
*1
: The offset +2 and the offset +3 are used.
*1 When '1' is set to "PulseDirectInput", an Event notification cannot be sent from an Accumulator object. To send an Event notification, set
'0'. (Page 184 Accumulator object)
Bit position Name Remarks
b15 Reset flag
b14 to b0 CTA Pulse counter value
Bit position Name Remarks
b31 to b0 PresentValue 32-bit unsigned integer
To Next Page
Loading...
