164
APPX
Appendix 3 Buffer Memory Areas
CH1 Previous logging read pointer
A before-update current logging read pointer is stored just before an interrupt to the CPU module causes the update.
For details on the logging function, refer to the following.
Page 61 Logging Function
■Buffer memory address
The following shows the buffer memory address of this area.
•CH Previous logging read pointer
•CH Previous logging read pointer (in Q compatible mode)
CH1 Logging read points monitor value
The number of the actual logging read points is stored.
When 'Operating condition setting request' (Y9) is turned on and off, a value is not stored in the channel where the logging
read function is disabled.
For details on the logging function, refer to the following.
Page 61 Logging Function
■Buffer memory address
The following shows the buffer memory address of this area.
•CH Logging read points monitor value
•CH Logging read points monitor value (in Q compatible mode)
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
439 639 839 1039 1239 1439 1639 1839 2039 2239 2439 2639 2839 3039 3239 3439
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
1224 1225 1226 1227 1228 1229 1230 1231
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
440 640 840 1040 1240 1440 1640 1840 2040 2240 2440 2640 2840 3040 3240 3440
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
1232 1233 1234 1235 1236 1237 1238 1239
To Next Page
Loading...
