APPX
Appendix 3 Buffer Memory Areas
179
A
CH1 Process alarm lower upper limit value
Set a lower upper limit value of the alert output function (Process alarm).
For details on the alert output function, refer to the following.
Page 30 Alert Output Function
■Buffer memory address
The following shows the buffer memory address of this area.
•CH Process alarm lower upper limit value
•CH Process alarm lower upper limit value (in Q compatible mode)
■Setting range
The setting range is from -32768 to 32767.
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is 0 for all channels.
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
518 718 918 1118 1318 1518 1718 1918 2118 2318 2518 2718 2918 3118 3318 3518
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
87 91 95 99 103 107 111 115
To Next Page
Loading...
