Mitsubishi FX1S Series - Page 27

FX1S Series Programmable Controllers Introduction 1
1-9
1
2
3
4
5
6
7
*1 Available for use with FX
1S
version 2.00 or later.
*2 When using the FX
1N
-EEPROM-8L with an expansion board in group C, only the loader
function (transfer program) can be used. Remove it from the PLC after using the loader
function and attach the top cover onto the PLC.
*3 GOT-F900 Series can connect via an FX
1N
-232-BD to the FX
1S
PLC.