Mitsubishi FX3U Series Operation Manual

1 Introduction
1.3 System Configuration
18
FX Configurator-FP
Operation Manual
*1. This Operating System is supported in FX Configurator-FP Ver.1.30 or later.
*2. This Operating System is supported in FX Configurator-FP Ver.1.50 or later.
*3. This Operating System is supported in FX Configurator-FP Ver.1.70 or later.
*4. When using Microsoft

Windows Vista

, Microsoft

Windows

7, Microsoft

Windows

8, Microsoft

Windows

8.1 or Microsoft

Windows

10 the recommended resolution is 1024768 or more.
Required memory
•Microsoft

Windows

95:
64MB or more
•Microsoft

Windows

98:
64MB or more
•Microsoft

Windows

Millennium Edition:
64MB or more
•Microsoft

WindowsNT

4.0:
64MB or more
•Microsoft

Windows

2000:
64MB or more
•Microsoft

Windows

XP:
128MB or more
•Microsoft

Windows Vista

:
1GB or more
•Microsoft

Windows

7:
1GB or more
•Microsoft

Windows

8:
1GB or more
•Microsoft

Windows

8.1:
1GB or more
•Microsoft

Windows

10:
1GB or more
Hard disk capacity 65MB or more
Disk drive CD-ROM drive
Display
SVGA (800  600) or higher
*4
Interface RS-232C port or USB port
Printer Printer, applicable to those OS above
Others Mouse or other pointing device
Item Description

Mitsubishi FX3U Series Specifications

General

Brand	Mitsubishi
Model	FX3U Series
Category	Controller
Language	English