Mitsubishi FX3U Series Operation Manual

4 Creating files
30
FX Configurator-FP
Operation Manual
4. Creating files
FX Configurator-FP sets and controls the data in the table below.
Caution
When creating and saving-as files, the characters and symbols below are not available for the file paths and
names.
/ , : ; * " < > | \ COM LPT AUX CON PRN NUL CLOCK
Data Description
Positioning
parameter
Parameters for positioning operations, i.e. pulse rate, feed rate and maximum speed of
20SSC-H
Table information Setting data for table operations of X/Y/XY-axis
Servo parameter
Data to be transferred from 20SSC-H to servo amplifiers, including servo amplifier series, gain/
filter, expansion, I/O, basic setting parameters.

Mitsubishi FX3U Series Specifications

General

Model	FX3U Series
Program Memory	64k steps
Execution Speed	0.065 μs/basic instruction
Type	PLC (Programmable Logic Controller)
Power Supply	100-240V AC
I/O Points	Up to 384
Communication	USB
Expansion	Supported via expansion modules
High-Speed Counters	Up to 6 channels
Analog Input/Output	Available via expansion modules
Temperature Range	0 to 55°C
Programming Language	Ladder Logic, Structured Text
Built-in Functions	PID control
Humidity	5 to 95% (non-condensing)