Mitsubishi FX3U Series Operation Manual

4 Creating files
4.4 Closing files
37
FX Configurator-FP
Operation Manual
1
Introduction
2
Install Uninstall Start&Exit
3
Window and Operation Config
4
Creating Files
5
Data set
6
Setting The Connection
7
Data flow And Procedure
8
Debug In the Positioning
9
Print
10
Edit Function In data
4.4 Closing files
Closing currently opened files.
1 Select [File]  [Close].
2 A message appears depending on the situation. Follow the message.
1) When the opened file is not changed
• Click <Yes> to close the current file.
• Click <No> to cancel the operation.
2) When the opened file is changed
• Click <Yes> to close the current file without saving.
• Click <No> to cancel the operation.

Mitsubishi FX3U Series Specifications

General

Model	FX3U Series
Program Memory	64k steps
Execution Speed	0.065 μs/basic instruction
Type	PLC (Programmable Logic Controller)
Power Supply	100-240V AC
I/O Points	Up to 384
Communication	USB
Expansion	Supported via expansion modules
High-Speed Counters	Up to 6 channels
Analog Input/Output	Available via expansion modules
Temperature Range	0 to 55°C
Programming Language	Ladder Logic, Structured Text
Built-in Functions	PID control
Humidity	5 to 95% (non-condensing)