Mitsubishi FX3U Series Operation Manual

4 Creating files
4.3 File storage
36
FX Configurator-FP
Operation Manual
4.3.2 Saving as files
Saving newly created files, and stored files in different names.
1 Select [File]  [Save as].
The dialog box to save as files appears.
2 Select a file location and file name to save as.
Caution
• Set the total amount of the character in the file path and name at 150 characters or below.
• The characters and symbols below are not available for file names.
/ , : ; * " < > | \ COM LPT AUX CON PRN NUL CLOCK
3 Click [Save].
Files are saved as in the specified name.
Item Description
Look in Select a file location
File name Enter the file name to open
Files of type
Select the files of type to open
FX Configurator-FP FILE (*.fsn) : opens data for FX Configurator-FP

Mitsubishi FX3U Series Specifications

General

Model	FX3U Series
Program Memory	64k steps
Execution Speed	0.065 μs/basic instruction
Type	PLC (Programmable Logic Controller)
Power Supply	100-240V AC
I/O Points	Up to 384
Communication	USB
Expansion	Supported via expansion modules
High-Speed Counters	Up to 6 channels
Analog Input/Output	Available via expansion modules
Temperature Range	0 to 55°C
Programming Language	Ladder Logic, Structured Text
Built-in Functions	PID control
Humidity	5 to 95% (non-condensing)