Mitsubishi FX3U Series

10 Edit function in data setting
10.1 Cut / Copy / Paste / Select all
92
FX Configurator-FP
Operation Manual
10. Edit function in data setting
10.1 Cut / Copy / Paste / Select all
Partially cutting/copying/pasting the positioning parameter settings. Also Cutting/copying the value in a table
of Microsoft

Excel or Word, and pasting the data cut/copied onto the FX Configurator-FP positioning
parameters.
10.1.1 Cut/Copy
1 Select cells to cut/copy.
2 Follow any of the procedures below.
• Click [Cut] / [Copy].
• Right-click to select [Cut] / [Copy].
• Select [Edit]  [Cut] / [Copy].
Caution on cutting
The selected range is treated as default value.