Mitsubishi FX3U Series Operation Manual

2 Installation, Uninstallation, Startup and Exit
2.4 Closing FX Configurator-FP
24
FX Configurator-FP
Operation Manual
2.4 Closing FX Configurator-FP
Note
When closing files or the application while online, i.e. Monitor Mode, Test Mode, the message bellow
appears. Close the application while offline.
1 Select [File]  [Exit].
2 FX Configurator-FP closes.
How to close the application from the title bar
• Right-click on the title bar and select [Close].
• Click on the right edge of the title bar.

Mitsubishi FX3U Series Specifications

General

Model	FX3U Series
Program Memory	64k steps
Execution Speed	0.065 μs/basic instruction
Type	PLC (Programmable Logic Controller)
Power Supply	100-240V AC
I/O Points	Up to 384
Communication	USB
Expansion	Supported via expansion modules
High-Speed Counters	Up to 6 channels
Analog Input/Output	Available via expansion modules
Temperature Range	0 to 55°C
Programming Language	Ladder Logic, Structured Text
Built-in Functions	PID control
Humidity	5 to 95% (non-condensing)