Mitsubishi FX3U Series Operation Manual

9 Print
9.1 Setting the printer
87
FX Configurator-FP
Operation Manual
1
Introduction
2
Install Uninstall Start&Exit
3
Window and Operation Config
4
Creating Files
5
Data set
6
Setting The Connection
7
Data flow And Procedure
8
Debug In the Positioning
9
Print
10
Edit Function In data
9. Print
9.1 Setting the printer
Setting the printer, paper and orientation.
1 Select  [File]  [Printer setup].
[Print Setup] dialog box appears.
2 Set each item for the print setup.
For print setup details, refer to the OS manual to be used.
For the printer property, refer to the printer manual to be used.

Mitsubishi FX3U Series Specifications

General

Model	FX3U Series
Program Memory	64k steps
Execution Speed	0.065 μs/basic instruction
Type	PLC (Programmable Logic Controller)
Power Supply	100-240V AC
I/O Points	Up to 384
Communication	USB
Expansion	Supported via expansion modules
High-Speed Counters	Up to 6 channels
Analog Input/Output	Available via expansion modules
Temperature Range	0 to 55°C
Programming Language	Ladder Logic, Structured Text
Built-in Functions	PID control
Humidity	5 to 95% (non-condensing)