Mitsubishi Lancer Evolution VI - Fuel Supply; General; Outline of Change

FUEL SUPPLY – General / Fuel Tank
13-69
FUEL SUPPLY
GENERAL
OUTLINE OF CHANGE
The service procedures have been revised as shown below because of change in the fuel pump & gauge
assembly and the fuel gauge unit. <EVOLUTION-VI>
FUEL TANK <EVOLUTION-VI>
REMOVAL AND INSTALLATION
4
3
2
1
6
5
7
1
1
Removal steps
1. Fuel hose
2. Fuel pump & gauge assembly
3. Packing
"AA 4. High-pressure fuel hose
5. Fuel pipe assembly
6. Fuel gauge unit
7. Packing
NOTE
The service procedures other than those mentioned above
remain unchanged.
INSTALLATION SERVICE POINT
"AA HIGH-PRESSURE FUEL HOSE INSTALLATION
Caution
After connecting the quick-release joint of the
high-pressure fuel hose, pull it gently in the direction
of removal to check that the hose is firmly connected
with a play of about 3 mm.